There are three mounting locations for attaching implements on tractors, namely: front, mid and rear. The most common front-mounted implement is the tractor loader. The loader arms are attached to either of the sides of the tractor’s engine, and their movements are controlled hydraulically. The loader arms are used to raise and lower the implement and allow the mounting of other implements like pallet fork, snow blower, etc., replacing the loader bucket. The loader bucket or any other implement that tilts up and down is also hydraulically-controlled.
The mid-mounting position is the least popular attachment point of the tractor as mounting, and dismounting implement from this position is tiring, if not difficult. The most commonly seen mid-mounted implement is the mower deck.
Attaching implements to the tractor’s rear, on the other hand, is achieved by using a drawbar or a three-point hitch. The three-point hitch is the more popular attachment method used by many tractor users as it allows the implement to be raised and lowered easily.
Most tractors that are marketed nowadays have one or two implements with varying combinations. There are those equipped with loaders and backhoe implements. There are also those that have loaders up front with mower deck between the front and rear wheels. Depending on the task at hand, the operator can select the appropriate implement to complete the job. There are several types of implements offered on the market today, and they include the following:
1) Front Loader
The most commonly attached implement is the loader, as it is often seen on the tractor’s front end alone or in combination with other implements. For most tractor users, the loader is arguably the most important implement for the tractor as it can perform a variety of tasks on a farm or homestead. It can be used to move around the significant amount of materials—that are heavy or disgusting to handle—and other mundane tasks such as transfer of animal manure to compost pits, movement of hay, gravel, fertilizers, etc. The tractor loader can also be used to shovel snow away from the driveway. Instead of the ubiquitous open bucket, the loader arms can also be fitted with other attachments like bale grappler, clamshell bucket, or pallet fork.
2) Pallet Fork / Fork Attachment for Tractor
The pallet fork is a versatile farm tool that can be attached to the tractor’s front loader arm. The pallet fork is more suitable in moving cumbersome and oversized loads such as hay bales, boxed farm products, and other pieces of farm equipment. Furthermore, It is been used for industrial purposes as well.
3) The Rear Blade
The rear blade is a simple mechanical implement that was designed primarily for leveling and grading the soil, particularly a gravel driveway. In addition to grading and leveling soil, the rear blade is used for spreading and pushing gravel or soil. This implement can be attached to the tractor’s rear through a three-point hitch and can be operated by driving the tractor forward or backward.
In its basic form, the single rear blade is manually adjusted from side to side as well as rotated on its axis or tilted at an angle requiring no power assist. Later models have a hydraulic assist to enable necessary blade adjustments by the operator without leaving his seat. Moreover, some newer model rear blades have back to back blades for forward and/or reverse operation. The rear blade is mainly used in building and maintaining gravel driveways and paths. It can also be used to move snow from the driveway.
4) The Box Blade
The box blade is said to be a variant of the rear blade as both implements share the same usage and functions. Moreover, both rear and box share the same design layouts and are both manually adjusted in their respective necessary forms. The main differences of the box blade to the rear blade is that the former has an additional row of “scarifiers” in addition to its blade. Moreover, the box blade uses a box framing to hold the scarifiers and the blade in tandem arrangement while the rear blade uses a simpler T-frame to hold its blade. Furthermore, the box blade can be used to perform the function of a rear blade by simply removing the scarifiers, while the rear can’t do the job of a box blade.
Like the rear blade, the box blade is offered in both hydraulically-assisted and manually-adjusted formats and is designed to perform similar tasks as those of the rear blade like grading or leveling gravel driveways or building new paths. Aside from these tasks, the box blade can also be used to level lands for new construction and to create or improve the contours of the land.
5) Land Plane
The landplane is an unpowered implement used to level the ground. This implement has two parallel blades that cut to the ground at a very shallow depth. These blades are set horizontally in tandem with one another at a slightly diagonal angle, for grading or leveling the soil. Some land plane models have added scarifiers for more aggressive ground churning. During operation, when the implement is pulled, the scraped soil is lifted and collected between the two blades. As the soil and other material accumulate, excess material flows over the width of the second blade leaving a trail of flat and smooth surface behind. The landplane can be attached to the tractor via the drawbar or the three-point hitch system.
6) Grooming Mower, Rotary Cutter / Tractor Brush Cutter Attachment
This power take-off or PTO-driven mechanical implement is usually attached to the bottom of the tractor between the front and rear axles or at the tractor’s rear. However, the lawn-mower implement and its more robust variant—the rotary cutter—can also be fitted to the tractor’s rear and/or front end. A grooming mower is an ideal tool for maintaining the growth of turf in your acreage and is efficient in trimming 8-inch grass down an inch tall. On the other hand, the rotary cutter is designed to deal with longer grasses, weeds and even shrubs. Moreover, although the mower and cutter have very similar usage, these two machines are not interchangeable.
7) Snow Blower
While you can use the front loader to shovel snow away from your driveway, the thickness of the snow limits the front loader’s effectiveness. The snow blower does not suffer this restriction when operating on thick snow. The snow blower is a power-driven implement that uses either the tractor’s power take-off or an integral motor to drive the snow auger that chews on the snow or the impeller that blows the snow away. Most snow blowers are mounted at the rear of the tractor and are powered by the tractor’s PTO unit.
On the other hand, some snow blowers are mounted on the tractor’s front end. This type of implement provides the benefit of driving forward. However, due to its being front-mounted, the implement cannot access the tractor’s PTO linkage and has to be provided with a separate integral power pack to drive the implement.
8) Post Hole Digger
The post hole digger or auger is a PTO-driven implement designed to bore a hole into the ground. This implement is attached at the rear of the tractor using a three-point hitch and is connected to the tractor’s PTO shaft. The auger bit is available in different lengths and diameters.
This implement was designed to scatter salt, lime, fertilizer, compost, or wood chips onto the ground. This implement can either be PTO-driven or ground-driven. PTO or power take-off is derived from the tractor via linkage to the PTO shaft. The ground-driven, on the other hand, utilizes a mechanical arrangement that derives its power from wheel movement as soon as the spreader is pulled by the tractor.
Dedicated Farming Implements
Aside from general utility implements, there are dedicated farming implements that are designed to be attached to the tractor. Some of these implements include the following:
This implement is drawn behind the tractor and is used to prepare the soil for planting by loosening or turning over the soil. Many different plow varieties are currently available on the market. While many plow varieties are PTO-driven, others are simple ground-driven models. Some examples of plow implement include the multi-furrow reversible plow, non-reversible mold-boards, and chisel plow.
This a tractor implement that is used for shallow tilling, covering the seeds, and killing weeds. It is usually drawn behind the tractor using a drawbar or 3-point hitch. The harrow is either equipped with free-spinning discs attached to a heavy X-shaped steel frame (to ensure that the disc’s path is not parallel to each other) or with a simple rectangular steel frame with flails or chains that is dragged behind the tractor.
This farming implement is designed to sow seeds and cereals. There is a vast variety of this type of implements. Some are simple construction with two or more seed containers; others have multiple containers with electric and hydraulic drives.
4) Hay Rake / Tractor Rake Attachment
This PTO-driven mechanical implement is used for tedding, spreading, and arranging straws or hay into windrows in preparation to baling. To spread the hay or straws, you can simply remove the hay stop from the implement so that the hay or straw will fly off. Putting the hay stop back collects the straws in a neat line.
5) Hay Baler
This farming implement is designed to collect and compress hays or straws into bales. Bales can either be cylindrical or rectangular in shape, wherein the hay is arranged and allowed to dry to preserve the hay’s inherent value. This mechanical contraption uses the tractor’s power take off as well.
In India, not all farmers can afford the purchase of agriculture implements/machinery. The farmers in India 7% Large Farmers, 14% Landless Farmers, 19% Marginal Farmers & 60% Small farmers are present. To make the all farmers including small farmers to make use of mechanization in farming, GoHelpMate comes with a unique platform for farmers where the small farmers will be able to rent out the farm implement cost-effective way & the large farmers will be able to rent out their less used implement increasing their income. The win-win platform for both small & large farmers.